• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Danagger plan b

J

jeff0201

Does anyone out there have any specs on the power supply for a Danagger Plan B silence eliminator? I think the Plan B + uses the same supply.

It's a 5 pin DIN connector. Looking at the power supply board inside the unit, it looks like it would need 2 positive voltages and 1 negative voltage, with respect to ground. Maybe +- 12 or 15v, and +5v.
 
According to the sticker on my Plan B power supply the din connector pins supply this:

1. + 5 vdc @ 2 amps
2. + 12 vdc @ 0.5 amps
3. NC
4. - 12 vdc @ 0.5 amps
5. Common
The keyway is signal ground

The pins are numbered in order from the keyway to the keyway. I can't tell if it's clockwise or counterclockwise.

The supply is a Elpac WM220-1.
 
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.
Back
Top Bottom