Hi, I have just received my Barix Instreamer 100 and Extreamer 100 (2) and have been reading the documentation supplied (rather sparse) and the info available online (slightly better). Never being one to re-invent the wheel, I would like to hear from those who have used these to distribute their audio to multiple transmitters, what mode you used, did you use the streaming client firmware upgrade, what settings worked for you, ect to achieve point to multipoint distribution. Basic setup is Station Playlist and Breakaway Broadcast on a dedicated computer. Streaming and one local Rangemaster on the roof being fed directly off the sound card and we are ready to add two Rangemasters north and south of the base via the internet. There is a NetGear router and we have done the port forwarding thing to make the streaming work, I assume it will also be necessary to forward a port to the Insteamer too. We have a static IP address at the studio but the various remote Tx sites would not unless we pay alot extra for them.
Look forward to everyones tales of horror and ultimate success stories. Thank you in advance.
Look forward to everyones tales of horror and ultimate success stories. Thank you in advance.