• Get involved.
    We want your input!
    Apply for Membership and join the conversations about everything related to broadcasting.

    After we receive your registration, a moderator will review it. After your registration is approved, you will be permitted to post.
    If you use a disposable or false email address, your registration will be rejected.

    After your membership is approved, please take a minute to tell us a little bit about yourself.
    https://www.radiodiscussions.com/forums/introduce-yourself.1088/

    Thanks in advance and have fun!
    RadioDiscussions Administrators

Audiovault with Inovonics 713 RDS Encoder

Z

zachmorton

Regular Participant
Anyone have the ini settings for outputting Audiovault to an Inovonics 713 RDS unit? Been trying to get this thing working forever and can't seem to get it right.
 
Why not let BE do it for you? If you have Audiovault, you have a support contract.

TRE is easiest, but it is an additional cost, if you don't have it. You can easily write a section in the INI to output the data via TCP or COM port to the encoder, once you configure a TCP Port/Data Format on the RDS unit.
 
Need similar help with AV 8.42.24 and 2wcom c-02 RDS Encoder...

chriscollins said:
Why not let BE do it for you? If you have Audiovault, you have a support contract.

TRE is easiest, but it is an additional cost, if you don't have it. You can easily write a section in the INI to output the data via TCP or COM port to the encoder, once you configure a TCP Port/Data Format on the RDS unit.
Click to expand...

I was asked to help a small Rock station in Oklahoma, and found the RDS Encoder in another room, with only power and Ethernet attached.

It is a 2wcom VC-02 (only called a c-02 on their site now) RDS Encoder.

Their AudioVault is v.8.42.24

Any help would be appreciated, but I am not expecting someone else to do my work for me. ;-)


All manuals seem to be missing here, so if there was an example how to add a remote section in an INI file, I have never seen it.
I have very little AV experience, but do have a lot of experience editting INI files, and understand what happens in AV when a comma is missing... (not good things)


Aaron

Fastest way to help is probably on phone, at least initially..
Tx number @ 806-228-904-8

Thanks for any help.
 
There should have been a CD with Arcos Config on it. It is necessary to configure the 2wcom box. Check http://www.2wcom.com/en/support.html and they may be able to send it to you.

Is the AudioVAULT system AV100, Vault2 or VaultExpress? AV100 uses proprietary audio cards, while the other two typically use Digigram cards.

If you register (free) on the http://www.bdcast.com site, you'll be able to access and download the manuals.
 
You must log in or register to reply here.
Status
This thread has been closed due to inactivity. You can create a new thread to discuss this topic.
Back
Top Bottom